Block paving driveways in Clarkston: the local picture
In and around Clarkston, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paved driveway cost in Clarkston?
In Scotland, a block paved driveway usually costs £85–£140 per m² including VAT. For a 50 m² double drive, that is roughly £4,250–£7,000. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Sharp-sand laying course screeded to falls
- Edge restraints or kerbs bedded and haunched in concrete
- Crushed-stone sub-base laid in layers and compacted
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Cuts at edges, around covers and against the house
Before we price your block paved driveway
- Ground conditions under the old surface and how deep the sub-base must be
- Whether front-garden planning rules apply
- Trees and roots near the drive
- Where an electric vehicle charger cable might run
- Edges against lawns, beds, walls and neighbours
Planning and kerb rules in Clarkston
Clarkston is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Block paved driveways in Clarkston: questions
Do I need planning permission for a block paved driveway in Clarkston?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Clarkston?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Is the survey in Clarkston free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Clarkston
Nearby towns we cover for block paved driveways, and block paved driveways across Renfrewshire and Inverclyde:
- Block paved driveways in Giffnock
- Block paved driveways in Newton Mearns
- Block paved driveways in Barrhead
- Block paved driveways in Paisley
- Block paved driveways in Renfrew
- Block paved driveways in Johnstone
