How much does a block paved driveway cost in Renfrewshire and Inverclyde?
In Scotland, a block paved driveway usually costs £85–£140 per m² including VAT. For a 50 m² double drive, that is roughly £4,250–£7,000. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Renfrewshire and Inverclyde
Choose a town for local prices and details for block paved driveways:
What is included?
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Sharp-sand laying course screeded to falls
- Cuts at edges, around covers and against the house
- Crushed-stone sub-base laid in layers and compacted
- Edge restraints or kerbs bedded and haunched in concrete
- Blocks laid in your chosen pattern, with a contrasting border if wanted
What the survey covers
- Existing manhole and inspection covers, and whether to recess them
- Ground conditions under the old surface and how deep the sub-base must be
- Trees and roots near the drive
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Edges against lawns, beds, walls and neighbours
Rules for front drives in Renfrewshire and Inverclyde
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Block paved driveways in Renfrewshire and Inverclyde: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do I need planning permission for a block paved driveway in Renfrewshire and Inverclyde?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
Is the survey in Renfrewshire and Inverclyde free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Can you match the blocks to my house in Renfrewshire and Inverclyde?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
