What to know before a block paved driveway in Erskine
Erskine is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paved driveway cost in Erskine?
For Erskine, our guide is £85–£140 per m² including VAT, so a 50 m² double drive is likely to be £4,250–£7,000. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Survey, measurements and a written, itemised quote
- Blocks laid in your chosen pattern, with a contrasting border if wanted
- Sharp-sand laying course screeded to falls
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Cuts at edges, around covers and against the house
What we check on an Erskine survey
- Whether front-garden planning rules apply
- Edges against lawns, beds, walls and neighbours
- Where an electric vehicle charger cable might run
- Block range, thickness, colour and pattern to suit the house
- The kerb: is it already dropped, and is it wide enough?
Planning and kerb rules in Erskine
Erskine is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Block paved driveways in Erskine: questions
Can you match the blocks to my house in Erskine?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do I need planning permission for a block paved driveway in Erskine?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
How much does a block paved driveway cost in Erskine?
Our guide for Erskine is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
Is the survey in Erskine free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Block paved driveways near Erskine
Nearby towns we cover for block paved driveways, and block paved driveways across Renfrewshire and Inverclyde:
- Block paved driveways in Renfrew
- Block paved driveways in Paisley
- Block paved driveways in Johnstone
- Block paved driveways in Barrhead
- Block paved driveways in Giffnock
- Block paved driveways in Port Glasgow
