What to know before a block paved driveway in Johnstone
Around Johnstone, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paved driveway cost in Johnstone?
Guide price in Johnstone: £85–£140 per m² including VAT, which puts a 50 m² double drive at about £4,250–£7,000. These are Scotland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Sharp-sand laying course screeded to falls
- Crushed-stone sub-base laid in layers and compacted
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Blocks laid in your chosen pattern, with a contrasting border if wanted
What the survey covers
- Block range, thickness, colour and pattern to suit the house
- Existing manhole and inspection covers, and whether to recess them
- Where an electric vehicle charger cable might run
- Where rain will go: falls, lawn, border, channel or soakaway
- Ground conditions under the old surface and how deep the sub-base must be
Rules for front drives in Johnstone
Johnstone is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Block paved driveways in Johnstone: questions
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Can you match the blocks to my house in Johnstone?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a block paved driveway cost in Johnstone?
Our guide for Johnstone is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Block paved driveways near Johnstone
Nearby towns we cover for block paved driveways, and block paved driveways across Renfrewshire and Inverclyde:
- Block paved driveways in Paisley
- Block paved driveways in Barrhead
- Block paved driveways in Erskine
- Block paved driveways in Renfrew
- Block paved driveways in Newton Mearns
- Block paved driveways in Giffnock
