Lift and re-lay block paving in Clarkston: what to expect
Clarkston is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a lift and re-lay job cost in Clarkston?
For Clarkston, our guide is £35–£80 per m² including VAT, so 30 m² re-laid is likely to be £1,050–£2,400. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £35–£80 per m² |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.
- Lifting, cleaning and stacking
- Survey of the blocks: thickness, damage and whether they are worth re-using
- Sub-base repaired or rebuilt where needed
- Blocks relaid, new cuts made, edges re-set
- Jointing sand and compaction
Before we price your lift and re-lay job
- How much of the area needs lifting to blend the repair
- Trees, roots and past trenches
- Whether the edging has moved or was never set in concrete
- What caused the dip or movement: base, laying course, edging or drains
- Whether a drain or gully is leaking under the paving
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Lift and re-lay in Clarkston: questions
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
How much does a lift and re-lay job cost in Clarkston?
Our guide is £35–£80 per m² including VAT. Small repairs are often priced from photos.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Do you cover Giffnock, Newton Mearns and Barrhead?
Yes. We cover Clarkston and the places around it, including Giffnock, Newton Mearns and Barrhead, and the rest of Renfrewshire and Inverclyde.
Lift and re-lay near Clarkston
Nearby towns we cover for lift and re-lay, and lift and re-lay across Renfrewshire and Inverclyde:
- Lift and re-lay in Giffnock
- Lift and re-lay in Newton Mearns
- Lift and re-lay in Barrhead
- Lift and re-lay in Paisley
- Lift and re-lay in Renfrew
- Lift and re-lay in Johnstone
