Planning a block paving cleaning job in Clarkston
Around Clarkston, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving cleaning job cost in Clarkston?
Guide price in Clarkston: £2.50–£5 per m² including VAT, which puts a 50 m² drive at about £125–£250. These are Scotland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Rinse down of edges, steps and walls
- Weeds and moss removed from the joints
- Kiln-dried sand brushed in once dry (re-sanding package)
- Rotary surface clean at a pressure that will not blow out the joints
- Pre-treatment where needed
How we find the cause
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Moss, algae, weeds and oil staining
- Shade and drainage, which affect regrowth
- Walls, doors and planting to protect
- Which sealer finish suits a slope or patio
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Cleaning in Clarkston: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How much does a block paving cleaning job cost in Clarkston?
Guide price for Clarkston: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Clarkston be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Do you cover Giffnock, Newton Mearns and Barrhead?
Yes. We cover Clarkston and the places around it, including Giffnock, Newton Mearns and Barrhead, and the rest of Renfrewshire and Inverclyde.
Cleaning near Clarkston
Nearby towns we cover for cleaning, and cleaning across Renfrewshire and Inverclyde:
- Cleaning in Giffnock
- Cleaning in Newton Mearns
- Cleaning in Barrhead
- Cleaning in Paisley
- Cleaning in Renfrew
- Cleaning in Johnstone
