Planning a block paved driveway in Blackburn
Across Blackburn, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a block paved driveway cost in Blackburn?
For Blackburn, our guide is £85–£140 per m² including VAT, so a 50 m² double drive is likely to be £4,250–£7,000. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Sharp-sand laying course screeded to falls
- Survey, measurements and a written, itemised quote
- Crushed-stone sub-base laid in layers and compacted
- Edge restraints or kerbs bedded and haunched in concrete
Before we price your block paved driveway
- Where rain will go: falls, lawn, border, channel or soakaway
- Steps, thresholds and door heights
- Whether front-garden planning rules apply
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Trees and roots near the drive
Do you need permission in Blackburn?
Blackburn is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Block paved driveways in Blackburn: questions
Is the survey in Blackburn free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a block paved driveway cost in Blackburn?
Our guide for Blackburn is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
Do I need planning permission for a block paved driveway in Blackburn?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Blackburn
Nearby towns we cover for block paved driveways, and block paved driveways across Lancashire:
- Block paved driveways in Darwen
- Block paved driveways in Accrington
- Block paved driveways in Chorley
- Block paved driveways in Rawtenstall
- Block paved driveways in Preston
- Block paved driveways in Leyland
