Planning a block paving cleaning job in Blackburn
Blackburn has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a block paving cleaning job cost in Blackburn?
In the North West, a block paving cleaning job usually costs £2.50–£5 per m² including VAT. For a 50 m² drive, that is roughly £125–£250. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving cleaning job involve?
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Kiln-dried sand brushed in once dry (re-sanding package)
- Optional biocide and sealer
- Pre-treatment where needed
- Rinse down of edges, steps and walls
- Rotary surface clean at a pressure that will not blow out the joints
How we find the cause
- Type of block and its age
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Shade and drainage, which affect regrowth
- Which sealer finish suits a slope or patio
- Walls, doors and planting to protect
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Cleaning in Blackburn: questions
How much does a block paving cleaning job cost in Blackburn?
Guide price for Blackburn: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
Do you cover Darwen, Accrington and Chorley?
Yes. We cover Blackburn and the places around it, including Darwen, Accrington and Chorley, and the rest of Lancashire.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in Blackburn be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Cleaning near Blackburn
Nearby towns we cover for cleaning, and cleaning across Lancashire:
- Cleaning in Darwen
- Cleaning in Accrington
- Cleaning in Chorley
- Cleaning in Rawtenstall
- Cleaning in Preston
- Cleaning in Leyland
