Lancashire · Sunken paving

Sunken and rutted block paving in Blackburn

Before you replace a block drive in Blackburn, ask whether it can be repaired: re-levelling and re-laying often cost far less than new paving.

  • Postcodes BB2, BB1
  • £300–£1,200 inc VAT
  • Free survey for new paving
Older block paved driveway with a sunken dip and a puddle in the wheel track

Sunken and rutted block paving in Blackburn: the local picture

Across Blackburn, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.

Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.

How much does a sunken area repair cost in Blackburn?

Guide price in Blackburn£300–£1,200Including VAT at 20%

Most sunken area repair quotes in the North West fall within £300–£1,200 including VAT, with any extras listed separately on your quote.

ItemGuide price inc VAT
Sunken or rutted patch repaired£300–£1,200
Small repair (a few blocks or a short trench)£200–£650
Lift and re-lay on a sound base£35–£80 per m²
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.

  • New laying course screeded to the correct level and falls
  • Sub-base dug out and rebuilt where it has failed
  • Investigation of the cause (drain, sub-base, laying course, edging)
  • Same blocks relaid, re-jointed and compacted
  • Blocks lifted, cleaned and stacked for re-use

What we look at first in Blackburn

  • How much of the area needs lifting to blend the repair
  • Condition and thickness of your existing blocks
  • What caused the dip or movement: base, laying course, edging or drains
  • Replacement blocks or hidden blocks to swap in
  • Whether a drain or gully is leaking under the paving

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Sunken paving in Blackburn: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

How much does a sunken area repair cost in Blackburn?

Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.

Can you repair block paving in Blackburn without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Do you cover Darwen, Accrington and Chorley?

Yes. We cover Blackburn and the places around it, including Darwen, Accrington and Chorley, and the rest of Lancashire.

Sunken paving near Blackburn

Nearby towns we cover for sunken paving, and sunken paving across Lancashire:

Other block paving services in Blackburn

Or see all block paving services in Blackburn.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Blackburn.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote