How much does a block paved driveway cost in Lancashire?
Most block paved driveway quotes in the North West fall within £85–£140 per m² including VAT. A 50 m² double drive would usually be about £4,250–£7,000, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026.
Towns we cover in Lancashire
Choose a town for local prices and details for block paved driveways:
- Preston
- Burnley
- Blackburn
- Blackpool
- Morecambe
- Lancaster
- Lytham St Annes
- Skelmersdale
- Leyland
- Accrington
- Chorley
- Darwen
- Thornton-Cleveleys
- Nelson, Lancashire
- Fleetwood
- Ormskirk
- Rawtenstall
- Colne
What is included?
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
- Edge restraints or kerbs bedded and haunched in concrete
- Survey, measurements and a written, itemised quote
- Crushed-stone sub-base laid in layers and compacted
- Sharp-sand laying course screeded to falls
- Cuts at edges, around covers and against the house
What the survey covers
- Block range, thickness, colour and pattern to suit the house
- The kerb: is it already dropped, and is it wide enough?
- Ground conditions under the old surface and how deep the sub-base must be
- Edges against lawns, beds, walls and neighbours
- Steps, thresholds and door heights
Rules for front drives in Lancashire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Block paved driveways in Lancashire: questions
Do I need planning permission for a block paved driveway in Lancashire?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Lancashire?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a block paved driveway cost in Lancashire?
Our guide for Lancashire is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
