Planning a block paved driveway in Blackpool
Blackpool has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a block paved driveway cost in Blackpool?
For Blackpool, our guide is £85–£140 per m² including VAT, so a 50 m² double drive is likely to be £4,250–£7,000. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Sharp-sand laying course screeded to falls
- Edge restraints or kerbs bedded and haunched in concrete
- Blocks laid in your chosen pattern, with a contrasting border if wanted
- Crushed-stone sub-base laid in layers and compacted
- Cuts at edges, around covers and against the house
What the survey covers
- Whether front-garden planning rules apply
- Steps, thresholds and door heights
- Edges against lawns, beds, walls and neighbours
- Access for a mini-digger, skip or grab lorry
- Where an electric vehicle charger cable might run
Planning and kerb rules in Blackpool
Blackpool is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Block paved driveways in Blackpool: questions
Do I need planning permission for a block paved driveway in Blackpool?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Blackpool?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a block paved driveway cost in Blackpool?
Our guide for Blackpool is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Block paved driveways near Blackpool
Nearby towns we cover for block paved driveways, and block paved driveways across Lancashire:
- Block paved driveways in Thornton-Cleveleys
- Block paved driveways in Lytham St Annes
- Block paved driveways in Fleetwood
- Block paved driveways in Preston
- Block paved driveways in Leyland
- Block paved driveways in Ormskirk
