Planning a replacement block drive in Blackpool
Blackpool has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a replacement block drive cost in Blackpool?
In the North West, a replacement block drive usually costs £95–£180 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,300–£8,100. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
- Assessment of the old base: keep, top up or replace
- New edging, sub-base where needed, and the block drive
- Break-out of the old surface with waste removal and skip or grab lorry
- Levels set below the damp-proof course with falls away from the house
- Drainage added where the old drive sent water to the house or road
What we check on a Blackpool survey
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Where an electric vehicle charger cable might run
- The kerb: is it already dropped, and is it wide enough?
- Trees and roots near the drive
- Whether front-garden planning rules apply
Rules for front drives in Blackpool
Blackpool is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Replace an old drive in Blackpool: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Can you match the blocks to my house in Blackpool?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do I need planning permission for a replacement block drive in Blackpool?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Replace an old drive near Blackpool
Nearby towns we cover for replace an old drive, and replace an old drive across Lancashire:
- Replace an old drive in Thornton-Cleveleys
- Replace an old drive in Lytham St Annes
- Replace an old drive in Fleetwood
- Replace an old drive in Preston
- Replace an old drive in Leyland
- Replace an old drive in Ormskirk
