What to know before a replacement block drive in Preston
Across Preston, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a replacement block drive cost in Preston?
Most replacement block drive quotes in the North West fall within £95–£180 per m² including VAT. A 45 m² replacement drive would usually be about £4,300–£8,100, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What does a replacement block drive involve?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Drainage added where the old drive sent water to the house or road
- Break-out of the old surface with waste removal and skip or grab lorry
- New edging, sub-base where needed, and the block drive
- Assessment of the old base: keep, top up or replace
- Levels set below the damp-proof course with falls away from the house
What the survey covers
- Edges against lawns, beds, walls and neighbours
- Access for a mini-digger, skip or grab lorry
- Whether front-garden planning rules apply
- Where rain will go: falls, lawn, border, channel or soakaway
- Trees and roots near the drive
Do you need permission in Preston?
Preston is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Replace an old drive in Preston: questions
Is the survey in Preston free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Do you cover Leyland, Chorley and Blackburn?
Yes. We cover Preston and the places around it, including Leyland, Chorley and Blackburn, and the rest of Lancashire.
How much does a replacement block drive cost in Preston?
Our guide for Preston is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Replace an old drive near Preston
Nearby towns we cover for replace an old drive, and replace an old drive across Lancashire:
- Replace an old drive in Leyland
- Replace an old drive in Chorley
- Replace an old drive in Blackburn
- Replace an old drive in Darwen
- Replace an old drive in Lytham St Annes
- Replace an old drive in Accrington
