Lancashire · Replace an old drive

Replacing tarmac or concrete with block paving in Darwen

From BB3 to the villages around Darwen, we quote replacement block drives built to one written specification, so you know exactly what is going under the blocks.

  • Postcodes BB3
  • £95–£180 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Planning a replacement block drive in Darwen

Darwen is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.

How much does a replacement block drive cost in Darwen?

Guide price in Darwen£95–£180 per m²Including VAT at 20%

Guide price in Darwen: £95–£180 per m² including VAT, which puts a 45 m² replacement drive at about £4,300–£8,100. These are North West guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Assessment of the old base: keep, top up or replace
  • New edging, sub-base where needed, and the block drive
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Drainage added where the old drive sent water to the house or road
  • Levels set below the damp-proof course with falls away from the house

What we check on a Darwen survey

  • Edges against lawns, beds, walls and neighbours
  • Where an electric vehicle charger cable might run
  • Steps, thresholds and door heights
  • Existing manhole and inspection covers, and whether to recess them
  • Block range, thickness, colour and pattern to suit the house

Rules for front drives in Darwen

Darwen is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Replace an old drive in Darwen: questions

Do you cover Blackburn, Accrington and Chorley?

Yes. We cover Darwen and the places around it, including Blackburn, Accrington and Chorley, and the rest of Lancashire.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Can you match the blocks to my house in Darwen?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Replace an old drive near Darwen

Nearby towns we cover for replace an old drive, and replace an old drive across Lancashire:

Other block paving services in Darwen

Or see all block paving services in Darwen.

Next step

Get a guide price in two minutes

Ready to talk about your replacement block drive? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote