Lancashire · Lift and re-lay

Lift and re-lay block paving in Preston

If your drive or patio in Preston has dips, ruts or broken blocks, we can usually re-use your own blocks so the repair matches.

  • Postcodes PR1, PR2, PR4
  • £35–£80 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Lift and re-lay block paving in Preston: what to expect

Preston has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.

Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.

How much does a lift and re-lay job cost in Preston?

Guide price in Preston£35–£80 per m²Including VAT at 20%

Guide price in Preston: £35–£80 per m² including VAT, which puts 30 m² re-laid at about £1,050–£2,400. These are North West guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Lift and re-lay on a sound base£35–£80 per m²
Small repair (a few blocks or a short trench)£200–£650
Sunken or rutted patch repaired£300–£1,200
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our lift and re-lay service

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

  • Jointing sand and compaction
  • Survey of the blocks: thickness, damage and whether they are worth re-using
  • Sub-base repaired or rebuilt where needed
  • Lifting, cleaning and stacking
  • Blocks relaid, new cuts made, edges re-set

How we find the cause

  • How much of the area needs lifting to blend the repair
  • Falls, so water does not collect again
  • Whether a drain or gully is leaking under the paving
  • Whether the edging has moved or was never set in concrete
  • Condition and thickness of your existing blocks

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Lift and re-lay in Preston: questions

Do you cover Leyland, Chorley and Blackburn?

Yes. We cover Preston and the places around it, including Leyland, Chorley and Blackburn, and the rest of Lancashire.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you repair block paving in Preston without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Lift and re-lay near Preston

Nearby towns we cover for lift and re-lay, and lift and re-lay across Lancashire:

Other block paving services in Preston

Or see all block paving services in Preston.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Preston.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote