Block paving driveways in Rawtenstall: the local picture
In and around Rawtenstall, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a block paved driveway cost in Rawtenstall?
Guide price in Rawtenstall: £85–£140 per m² including VAT, which puts a 50 m² double drive at about £4,250–£7,000. These are North West guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Cuts at edges, around covers and against the house
- Crushed-stone sub-base laid in layers and compacted
- Sharp-sand laying course screeded to falls
- Survey, measurements and a written, itemised quote
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
What we check on a Rawtenstall survey
- Ground conditions under the old surface and how deep the sub-base must be
- Existing manhole and inspection covers, and whether to recess them
- Steps, thresholds and door heights
- Access for a mini-digger, skip or grab lorry
- Where rain will go: falls, lawn, border, channel or soakaway
Rules for front drives in Rawtenstall
Rawtenstall is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Block paved driveways in Rawtenstall: questions
Do you cover Accrington, Burnley and Darwen?
Yes. We cover Rawtenstall and the places around it, including Accrington, Burnley and Darwen, and the rest of Lancashire.
Can you match the blocks to my house in Rawtenstall?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a block paved driveway cost in Rawtenstall?
Our guide for Rawtenstall is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Rawtenstall
Nearby towns we cover for block paved driveways, and block paved driveways across Lancashire:
- Block paved driveways in Accrington
- Block paved driveways in Burnley
- Block paved driveways in Darwen
- Block paved driveways in Blackburn
- Block paved driveways in Nelson, Lancashire
- Block paved driveways in Colne
