Perth and Kinross · Replace an old drive

Replacing tarmac or concrete with block paving in Scone

Block paving suits homes in Scone because it can be repaired a block at a time and looks right for decades when the base underneath is built properly.

  • Postcodes PH2, PH1
  • £95–£180 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Replacing tarmac or concrete with block paving in Scone: the local picture

In and around Scone, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

How much does a replacement block drive cost in Scone?

Guide price in Scone£95–£180 per m²Including VAT at 20%

For Scone, our guide is £95–£180 per m² including VAT, so a 45 m² replacement drive is likely to be £4,300–£8,100. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Drainage added where the old drive sent water to the house or road
  • New edging, sub-base where needed, and the block drive
  • Levels set below the damp-proof course with falls away from the house
  • Assessment of the old base: keep, top up or replace
  • Break-out of the old surface with waste removal and skip or grab lorry

What we check on a Scone survey

  • Where an electric vehicle charger cable might run
  • Block range, thickness, colour and pattern to suit the house
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Steps, thresholds and door heights
  • Access for a mini-digger, skip or grab lorry

Do you need permission in Scone?

Scone is in Scotland, so these rules apply:

In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.

Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.

A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Why choose Block Paving Contractors

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Replace an old drive in Scone: questions

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Is the survey in Scone free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Can you match the blocks to my house in Scone?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Replace an old drive near Scone

Nearby towns we cover for replace an old drive, and replace an old drive across Perth and Kinross:

Other block paving services in Scone

Or see all block paving services in Scone.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Scone.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote