Planning a replacement block drive in Perth
In Perth, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a replacement block drive cost in Perth?
In Scotland, a replacement block drive usually costs £95–£180 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,300–£8,100. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What does a replacement block drive involve?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Levels set below the damp-proof course with falls away from the house
- New edging, sub-base where needed, and the block drive
- Drainage added where the old drive sent water to the house or road
- Break-out of the old surface with waste removal and skip or grab lorry
- Assessment of the old base: keep, top up or replace
What we check on a Perth survey
- Where rain will go: falls, lawn, border, channel or soakaway
- Edges against lawns, beds, walls and neighbours
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Existing manhole and inspection covers, and whether to recess them
- Whether front-garden planning rules apply
Rules for front drives in Perth
Perth is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Replace an old drive in Perth: questions
Can you match the blocks to my house in Perth?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do you cover Scone, Auchterarder and Blairgowrie?
Yes. We cover Perth and the places around it, including Scone, Auchterarder and Blairgowrie, and the rest of Perth and Kinross.
Is the survey in Perth free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a replacement block drive cost in Perth?
Our guide for Perth is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.
Replace an old drive near Perth
Nearby towns we cover for replace an old drive, and replace an old drive across Perth and Kinross:
- Replace an old drive in Scone
- Replace an old drive in Auchterarder
- Replace an old drive in Blairgowrie
- Replace an old drive in Crieff
