Planning a block paved driveway in Perth
Perth is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paved driveway cost in Perth?
Expect block paved driveways in Perth to come in at around £85–£140 per m², including VAT at 20%. As an example, a 50 m² double drive usually comes to between £4,250 and £7,000.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paved driveway involve?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Blocks laid in your chosen pattern, with a contrasting border if wanted
- Survey, measurements and a written, itemised quote
- Edge restraints or kerbs bedded and haunched in concrete
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Crushed-stone sub-base laid in layers and compacted
What we check on a Perth survey
- Ground conditions under the old surface and how deep the sub-base must be
- Where rain will go: falls, lawn, border, channel or soakaway
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Edges against lawns, beds, walls and neighbours
- Where an electric vehicle charger cable might run
Rules for front drives in Perth
Perth is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Block paved driveways in Perth: questions
Do I need planning permission for a block paved driveway in Perth?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
Do you cover Scone, Auchterarder and Blairgowrie?
Yes. We cover Perth and the places around it, including Scone, Auchterarder and Blairgowrie, and the rest of Perth and Kinross.
Can you match the blocks to my house in Perth?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Perth
Nearby towns we cover for block paved driveways, and block paved driveways across Perth and Kinross:
- Block paved driveways in Scone
- Block paved driveways in Auchterarder
- Block paved driveways in Blairgowrie
- Block paved driveways in Crieff
