How much does a replacement block drive cost in Perth and Kinross?
Expect replacement block drives in Perth and Kinross to come in at around £95–£180 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £4,300 and £8,100.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Perth and Kinross
Choose a town for local prices and details for replace an old drive:
What is included?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Drainage added where the old drive sent water to the house or road
- Break-out of the old surface with waste removal and skip or grab lorry
- Assessment of the old base: keep, top up or replace
- Levels set below the damp-proof course with falls away from the house
- New edging, sub-base where needed, and the block drive
What the survey covers
- Ground conditions under the old surface and how deep the sub-base must be
- Access for a mini-digger, skip or grab lorry
- Whether front-garden planning rules apply
- The kerb: is it already dropped, and is it wide enough?
- Block range, thickness, colour and pattern to suit the house
Rules for front drives in Perth and Kinross
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Replace an old drive in Perth and Kinross: questions
Do I need planning permission for a replacement block drive in Perth and Kinross?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do you cover Perth, Blairgowrie and Crieff?
Yes. We cover all of Perth and Kinross, including Perth, Blairgowrie and Crieff.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
