Perth and Kinross · Permeable paving

Permeable block paving in Scone

If you are in Scone (PH2, PH1) and want a permeable block drive, we will come out, measure up and give you a fixed written price once the specification is agreed.

  • Postcodes PH2, PH1
  • £105–£170 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Planning a permeable block drive in Scone

Scone is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

How much does a permeable block drive cost in Scone?

Guide price in Scone£105–£170 per m²Including VAT at 20%

Guide price in Scone: £105–£170 per m² including VAT, which puts a 50 m² drive at about £5,250–£8,500. These are Scotland guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Permeable block paving driveway£105–£170 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What does a permeable block drive involve?

It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.

  • Geotextile layer where the design needs one
  • Ground check: how well the soil drains and how high the water table sits
  • Grit laying course and permeable blocks with grit-filled joints
  • Deeper dig-out for the open-graded sub-base
  • Open-graded crushed stone (no fines) laid and compacted in layers

What the survey covers

  • Trees and roots near the drive
  • Ground conditions under the old surface and how deep the sub-base must be
  • Whether front-garden planning rules apply
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Where rain will go: falls, lawn, border, channel or soakaway

Planning and kerb rules in Scone

Scone is in Scotland, so these rules apply:

In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.

Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.

A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Permeable paving in Scone: questions

How much does a permeable block drive cost in Scone?

Our guide for Scone is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.

Can you match the blocks to my house in Scone?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Is the survey in Scone free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Do I need planning permission for a permeable block drive in Scone?

In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.

Permeable paving near Scone

Nearby towns we cover for permeable paving, and permeable paving across Perth and Kinross:

Other block paving services in Scone

Or see all block paving services in Scone.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote