Perth and Kinross · Permeable paving

Permeable block paving in Blairgowrie

Block paving suits homes in Blairgowrie because it can be repaired a block at a time and looks right for decades when the base underneath is built properly.

  • Postcodes PH10, PH13, PH11
  • £105–£170 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Planning a permeable block drive in Blairgowrie

In and around Blairgowrie, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

How much does a permeable block drive cost in Blairgowrie?

Guide price in Blairgowrie£105–£170 per m²Including VAT at 20%

In Scotland, a permeable block drive usually costs £105–£170 per m² including VAT. For a 50 m² drive, that is roughly £5,250–£8,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Permeable block paving driveway£105–£170 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What does a permeable block drive involve?

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Geotextile layer where the design needs one
  • Edge restraints and any overflow or outlet the design needs
  • Grit laying course and permeable blocks with grit-filled joints
  • Deeper dig-out for the open-graded sub-base

Before we price your permeable block drive

  • Edges against lawns, beds, walls and neighbours
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Block range, thickness, colour and pattern to suit the house
  • Existing manhole and inspection covers, and whether to recess them
  • Whether front-garden planning rules apply

Planning and kerb rules in Blairgowrie

Blairgowrie is in Scotland, so these rules apply:

In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.

Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.

A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

What you can expect from us

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Permeable paving in Blairgowrie: questions

Do you cover Scone, Perth and Crieff?

Yes. We cover Blairgowrie and the places around it, including Scone, Perth and Crieff, and the rest of Perth and Kinross.

How long does a permeable block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do I need planning permission for a permeable block drive in Blairgowrie?

In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Permeable paving near Blairgowrie

Nearby towns we cover for permeable paving, and permeable paving across Perth and Kinross:

Other block paving services in Blairgowrie

Or see all block paving services in Blairgowrie.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Blairgowrie.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote