Block paving sealing in Blairgowrie: the local picture
Around Blairgowrie, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving sealing job cost in Blairgowrie?
Most block paving sealing job quotes in Scotland fall within £5–£15 per m² including VAT. A 50 m² drive would usually be about £250–£750, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Check that the paving is clean, re-sanded and dry
- Second coat where the product requires it
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
What we look at first in Blairgowrie
- Whether any blocks are loose or sunken first
- How much joint sand is left
- Which sealer finish suits a slope or patio
- Shade and drainage, which affect regrowth
- Type of block and its age
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Sealing in Blairgowrie: questions
How much does a block paving sealing job cost in Blairgowrie?
Guide price for Blairgowrie: £5–£15 per m² including VAT, with a minimum charge for small areas.
Do you cover Scone, Perth and Crieff?
Yes. We cover Blairgowrie and the places around it, including Scone, Perth and Crieff, and the rest of Perth and Kinross.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Blairgowrie
Nearby towns we cover for sealing, and sealing across Perth and Kinross:
