How much does a block paving sealing job cost in Perth and Kinross?
For Perth and Kinross, our guide is £5–£15 per m² including VAT, so a 50 m² drive is likely to be £250–£750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Perth and Kinross
Choose a town for local prices and details for sealing:
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Edges, walls and doors protected
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Second coat where the product requires it
- Check that the paving is clean, re-sanded and dry
How we find the cause
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Type of block and its age
- Which sealer finish suits a slope or patio
- Moss, algae, weeds and oil staining
- Whether any blocks are loose or sunken first
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Sealing in Perth and Kinross: questions
Do you cover Perth, Blairgowrie and Crieff?
Yes. We cover all of Perth and Kinross, including Perth, Blairgowrie and Crieff.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How much does a block paving sealing job cost in Perth and Kinross?
Guide price for Perth and Kinross: £5–£15 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
