Planning a block paving cleaning job in Blairgowrie
Around Blairgowrie, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving cleaning job cost in Blairgowrie?
In Scotland, a block paving cleaning job usually costs £2.50–£5 per m² including VAT. For a 50 m² drive, that is roughly £125–£250. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our cleaning service
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Rotary surface clean at a pressure that will not blow out the joints
- Rinse down of edges, steps and walls
- Weeds and moss removed from the joints
- Optional biocide and sealer
- Kiln-dried sand brushed in once dry (re-sanding package)
How we find the cause
- How much joint sand is left
- Type of block and its age
- Which sealer finish suits a slope or patio
- Shade and drainage, which affect regrowth
- Whether any blocks are loose or sunken first
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Cleaning in Blairgowrie: questions
How much does a block paving cleaning job cost in Blairgowrie?
Guide price for Blairgowrie: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
Do you cover Scone, Perth and Crieff?
Yes. We cover Blairgowrie and the places around it, including Scone, Perth and Crieff, and the rest of Perth and Kinross.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Cleaning near Blairgowrie
Nearby towns we cover for cleaning, and cleaning across Perth and Kinross:
