Kent · Replace an old drive

Replacing tarmac or concrete with block paving in Sevenoaks

Thinking about replacement block drives in Sevenoaks? We survey, specify and build them for homeowners across Sevenoaks and the surrounding TN postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes TN13, TN14, TN15
  • £105–£195 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Planning a replacement block drive in Sevenoaks

Sevenoaks is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a replacement block drive cost in Sevenoaks?

Guide price in Sevenoaks£105–£195 per m²Including VAT at 20%

Guide price in Sevenoaks: £105–£195 per m² including VAT, which puts a 45 m² replacement drive at about £4,600–£8,750. These are South East guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£105–£195 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

  • Break-out of the old surface with waste removal and skip or grab lorry
  • Drainage added where the old drive sent water to the house or road
  • Assessment of the old base: keep, top up or replace
  • Levels set below the damp-proof course with falls away from the house
  • New edging, sub-base where needed, and the block drive

What we check on a Sevenoaks survey

  • Whether front-garden planning rules apply
  • Existing manhole and inspection covers, and whether to recess them
  • Edges against lawns, beds, walls and neighbours
  • Where an electric vehicle charger cable might run
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)

Planning and kerb rules in Sevenoaks

Sevenoaks is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Why choose Block Paving Contractors

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Replace an old drive in Sevenoaks: questions

Do I need planning permission for a replacement block drive in Sevenoaks?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Is the survey in Sevenoaks free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do you cover Tonbridge, Swanley and Tunbridge Wells?

Yes. We cover Sevenoaks and the places around it, including Tonbridge, Swanley and Tunbridge Wells, and the rest of Kent.

Replace an old drive near Sevenoaks

Nearby towns we cover for replace an old drive, and replace an old drive across Kent:

Other block paving services in Sevenoaks

Or see all block paving services in Sevenoaks.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Sevenoaks.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote