England · Replace an old drive

Replacing tarmac or concrete with block paving in Kent

Replacing tarmac or concrete with block paving in Kent: built on a properly dug and compacted base, edged in concrete and laid to falls that take water away from the house.

  • 22 towns listed
  • £105–£195 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

How much does a replacement block drive cost in Kent?

Guide price in Kent£105–£195 per m²Including VAT at 20%

Most replacement block drive quotes in the South East fall within £105–£195 per m² including VAT. A 45 m² replacement drive would usually be about £4,600–£8,750, with any extras listed separately on your quote.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£105–£195 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026.

Towns we cover in Kent

Choose a town for local prices and details for replace an old drive:

What does a replacement block drive involve?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

  • Drainage added where the old drive sent water to the house or road
  • Break-out of the old surface with waste removal and skip or grab lorry
  • New edging, sub-base where needed, and the block drive
  • Levels set below the damp-proof course with falls away from the house
  • Assessment of the old base: keep, top up or replace

What the survey covers

  • Where an electric vehicle charger cable might run
  • The kerb: is it already dropped, and is it wide enough?
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Existing manhole and inspection covers, and whether to recess them
  • Edges against lawns, beds, walls and neighbours

Rules for front drives in Kent

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Replace an old drive in Kent: questions

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do you cover Maidstone, Gillingham and Tunbridge Wells?

Yes. We cover all of Kent, including Maidstone, Gillingham and Tunbridge Wells.

Do I need planning permission for a replacement block drive in Kent?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Can you match the blocks to my house in Kent?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote