Kent · Replace an old drive

Replacing tarmac or concrete with block paving in Tunbridge Wells

We quote replacement block drives throughout Tunbridge Wells and Kent. The survey sets the depth of dig and the drainage; the pattern and colour are your choice.

  • Postcodes TN1, TN3, TN4
  • £105–£195 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Replacing tarmac or concrete with block paving in Tunbridge Wells: the local picture

Homes in Tunbridge Wells include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a replacement block drive cost in Tunbridge Wells?

Guide price in Tunbridge Wells£105–£195 per m²Including VAT at 20%

Guide price in Tunbridge Wells: £105–£195 per m² including VAT, which puts a 45 m² replacement drive at about £4,600–£8,750. These are South East guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£105–£195 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our replace an old drive service

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Levels set below the damp-proof course with falls away from the house
  • New edging, sub-base where needed, and the block drive
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Drainage added where the old drive sent water to the house or road
  • Assessment of the old base: keep, top up or replace

What we check on a Tunbridge Wells survey

  • Existing manhole and inspection covers, and whether to recess them
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Block range, thickness, colour and pattern to suit the house
  • Where an electric vehicle charger cable might run
  • Ground conditions under the old surface and how deep the sub-base must be

Planning and kerb rules in Tunbridge Wells

Tunbridge Wells is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Replace an old drive in Tunbridge Wells: questions

Is the survey in Tunbridge Wells free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

How much does a replacement block drive cost in Tunbridge Wells?

Our guide for Tunbridge Wells is £105–£195 per m² including VAT, so a 45 m² replacement drive is usually about £4,600–£8,750. Your fixed price follows the survey.

Do I need planning permission for a replacement block drive in Tunbridge Wells?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Replace an old drive near Tunbridge Wells

Nearby towns we cover for replace an old drive, and replace an old drive across Kent:

Other block paving services in Tunbridge Wells

Or see all block paving services in Tunbridge Wells.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Tunbridge Wells.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote