Replacing tarmac or concrete with block paving in Whitstable: the local picture
Homes in Whitstable include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a replacement block drive cost in Whitstable?
For Whitstable, our guide is £105–£195 per m² including VAT, so a 45 m² replacement drive is likely to be £4,600–£8,750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £105–£195 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
- Break-out of the old surface with waste removal and skip or grab lorry
- Drainage added where the old drive sent water to the house or road
- Levels set below the damp-proof course with falls away from the house
- Assessment of the old base: keep, top up or replace
- New edging, sub-base where needed, and the block drive
What we check on a Whitstable survey
- Steps, thresholds and door heights
- Block range, thickness, colour and pattern to suit the house
- Access for a mini-digger, skip or grab lorry
- Where rain will go: falls, lawn, border, channel or soakaway
- Edges against lawns, beds, walls and neighbours
Do you need permission in Whitstable?
Whitstable is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Replace an old drive in Whitstable: questions
How much does a replacement block drive cost in Whitstable?
Our guide for Whitstable is £105–£195 per m² including VAT, so a 45 m² replacement drive is usually about £4,600–£8,750. Your fixed price follows the survey.
Do I need planning permission for a replacement block drive in Whitstable?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Whitstable?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Replace an old drive near Whitstable
Nearby towns we cover for replace an old drive, and replace an old drive across Kent:
- Replace an old drive in Herne Bay
- Replace an old drive in Canterbury
- Replace an old drive in Faversham
- Replace an old drive in Sittingbourne
- Replace an old drive in Margate
- Replace an old drive in Ashford, Kent
