Permeable block paving in Whitstable: the local picture
In Whitstable, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a permeable block drive cost in Whitstable?
Most permeable block drive quotes in the South East fall within £115–£185 per m² including VAT. A 50 m² drive would usually be about £5,650–£9,200, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £115–£185 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Ground check: how well the soil drains and how high the water table sits
- Deeper dig-out for the open-graded sub-base
- Open-graded crushed stone (no fines) laid and compacted in layers
- Geotextile layer where the design needs one
- Edge restraints and any overflow or outlet the design needs
What the survey covers
- Where rain will go: falls, lawn, border, channel or soakaway
- Access for a mini-digger, skip or grab lorry
- Edges against lawns, beds, walls and neighbours
- Steps, thresholds and door heights
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Do you need permission in Whitstable?
Whitstable is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Permeable paving in Whitstable: questions
Can you match the blocks to my house in Whitstable?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a permeable block drive cost in Whitstable?
Our guide for Whitstable is £115–£185 per m² including VAT, so a 50 m² drive is usually about £5,650–£9,200. Your fixed price follows the survey.
Do I need planning permission for a permeable block drive in Whitstable?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Permeable paving near Whitstable
Nearby towns we cover for permeable paving, and permeable paving across Kent:
- Permeable paving in Herne Bay
- Permeable paving in Canterbury
- Permeable paving in Faversham
- Permeable paving in Sittingbourne
- Permeable paving in Margate
- Permeable paving in Ashford, Kent
