Block paved patios in Sevenoaks: the local picture
Homes in Sevenoaks include plenty of semis and detached houses with gardens big enough for a patio and a path to the gate.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a block paved patio cost in Sevenoaks?
Guide price in Sevenoaks: £85–£150 per m² including VAT, which puts a 20 m² patio at about £2,000–£3,500. These are South East guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Block paved patio (concrete block) | £85–£150 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Step with block or brick riser and paved tread | £195–£380 per step |
| Typical channel drain run | £380–£1,100 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our patios service
A block paved patio is a garden seating or dining area paved with concrete or clay blocks on a compacted base. Because a patio carries people and furniture rather than cars, the sub-base is thinner than for a drive, but the falls, edging and drainage matter just as much.
- Blocks in your pattern, edges and cuts
- Dig-out and compacted sub-base (around 100 mm for foot traffic)
- Jointing sand and compaction
- Falls away from the house and doors
- Layout marked out with you, including steps and doors
What the survey covers
- Steps, walls and changes of level
- Block range, colour, pattern and border to suit the house
- Edges against lawns, beds, fences and walls
- Trees and roots near the paving
- Manhole and inspection covers in the area
Do you need permission for a block paved patio in Sevenoaks?
A patio or path behind the house does not usually need planning permission. Raised patios, listed buildings and flats can be different, so we check on the survey.
Paving in front of the house follows the front-garden rules: in England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary.
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Patios in Sevenoaks: questions
Can the paving be level with the back door?
Paving normally sits at least 150 mm below the damp-proof course. A level step-out needs a drainage channel against the house and careful detailing, which we agree on the survey.
Is the survey in Sevenoaks free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How long does a block paved patio take?
Most patios and paths take two to five working days, depending on the size, any steps and the dig. Your quote gives the expected duration.
How much does a block paved patio cost in Sevenoaks?
Our guide for Sevenoaks is £85–£150 per m² including VAT, so a 20 m² patio is usually about £2,000–£3,500. Your fixed price follows the survey.
Patios near Sevenoaks
Nearby towns we cover for patios, and patios across Kent:
- Patios in Tonbridge
- Patios in Swanley
- Patios in Tunbridge Wells
- Patios in Dartford
- Patios in Gravesend
- Patios in Maidstone
