Kent · Block paved driveways

Block paving driveways in Sevenoaks

If you are in Sevenoaks (TN13, TN14, TN15, TN8) and want a block paved driveway, we will come out, measure up and give you a fixed written price once the specification is agreed.

  • Postcodes TN13, TN14, TN15
  • £90–£150 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Sevenoaks: the local picture

Homes in Sevenoaks include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a block paved driveway cost in Sevenoaks?

Guide price in Sevenoaks£90–£150 per m²Including VAT at 20%

In the South East, a block paved driveway usually costs £90–£150 per m² including VAT. For a 50 m² double drive, that is roughly £4,600–£7,550. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£90–£150 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Blocks laid in your chosen pattern, with a contrasting border if wanted
  • Cuts at edges, around covers and against the house
  • Survey, measurements and a written, itemised quote
  • Edge restraints or kerbs bedded and haunched in concrete

What we check on a Sevenoaks survey

  • Whether front-garden planning rules apply
  • Trees and roots near the drive
  • Existing manhole and inspection covers, and whether to recess them
  • Where an electric vehicle charger cable might run
  • Where rain will go: falls, lawn, border, channel or soakaway

Do you need permission in Sevenoaks?

Sevenoaks is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Block paved driveways in Sevenoaks: questions

How much does a block paved driveway cost in Sevenoaks?

Our guide for Sevenoaks is £90–£150 per m² including VAT, so a 50 m² double drive is usually about £4,600–£7,550. Your fixed price follows the survey.

Is the survey in Sevenoaks free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Can you match the blocks to my house in Sevenoaks?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Do I need planning permission for a block paved driveway in Sevenoaks?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Block paved driveways near Sevenoaks

Nearby towns we cover for block paved driveways, and block paved driveways across Kent:

Other block paving services in Sevenoaks

Or see all block paving services in Sevenoaks.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote