What to know before a replacement block drive in Livingston
Livingston is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a replacement block drive cost in Livingston?
Expect replacement block drives in Livingston to come in at around £95–£180 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £4,300 and £8,100.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our replace an old drive service
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Levels set below the damp-proof course with falls away from the house
- Break-out of the old surface with waste removal and skip or grab lorry
- New edging, sub-base where needed, and the block drive
- Assessment of the old base: keep, top up or replace
- Drainage added where the old drive sent water to the house or road
What the survey covers
- Whether front-garden planning rules apply
- Steps, thresholds and door heights
- Where an electric vehicle charger cable might run
- Block range, thickness, colour and pattern to suit the house
- The kerb: is it already dropped, and is it wide enough?
Planning and kerb rules in Livingston
Livingston is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Replace an old drive in Livingston: questions
Can you match the blocks to my house in Livingston?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How much does a replacement block drive cost in Livingston?
Our guide for Livingston is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.
Do I need planning permission for a replacement block drive in Livingston?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
Replace an old drive near Livingston
Nearby towns we cover for replace an old drive, and replace an old drive across Edinburgh and the Lothians:
- Replace an old drive in Broxburn
- Replace an old drive in Bathgate
- Replace an old drive in Linlithgow
- Replace an old drive in Whitburn
- Replace an old drive in Armadale
- Replace an old drive in Penicuik
