Planning a block paving cleaning job in Livingston
In Livingston, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving cleaning job cost in Livingston?
For Livingston, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £125–£250. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Rinse down of edges, steps and walls
- Rotary surface clean at a pressure that will not blow out the joints
- Pre-treatment where needed
- Weeds and moss removed from the joints
- Optional biocide and sealer
What we look at first in Livingston
- Whether any blocks are loose or sunken first
- Walls, doors and planting to protect
- Moss, algae, weeds and oil staining
- Shade and drainage, which affect regrowth
- How much joint sand is left
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Cleaning in Livingston: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Do you cover Broxburn, Bathgate and Linlithgow?
Yes. We cover Livingston and the places around it, including Broxburn, Bathgate and Linlithgow, and the rest of Edinburgh and the Lothians.
How much does a block paving cleaning job cost in Livingston?
Guide price for Livingston: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
Cleaning near Livingston
Nearby towns we cover for cleaning, and cleaning across Edinburgh and the Lothians:
- Cleaning in Broxburn
- Cleaning in Bathgate
- Cleaning in Linlithgow
- Cleaning in Whitburn
- Cleaning in Armadale
- Cleaning in Penicuik
