Planning a block paving sealing job in Livingston
Livingston is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving sealing job cost in Livingston?
Guide price in Livingston: £5–£15 per m² including VAT, which puts a 50 m² drive at about £250–£750. These are Scotland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.
- Second coat where the product requires it
- Sealer applied evenly by roller or low-pressure sprayer
- Check that the paving is clean, re-sanded and dry
- Drying time and a date when cars can return
- Edges, walls and doors protected
What we look at first in Livingston
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Type of block and its age
- Walls, doors and planting to protect
- How much joint sand is left
- Which sealer finish suits a slope or patio
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in Livingston: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Livingston be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Livingston?
Guide price for Livingston: £5–£15 per m² including VAT, with a minimum charge for small areas.
Sealing near Livingston
Nearby towns we cover for sealing, and sealing across Edinburgh and the Lothians:
- Sealing in Broxburn
- Sealing in Bathgate
- Sealing in Linlithgow
- Sealing in Whitburn
- Sealing in Armadale
- Sealing in Penicuik
