How much does a replacement block drive cost in Edinburgh and the Lothians?
Guide price in Edinburgh and the Lothians: £95–£180 per m² including VAT, which puts a 45 m² replacement drive at about £4,300–£8,100. These are Scotland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Edinburgh and the Lothians
Choose a town for local prices and details for replace an old drive:
- Livingston
- Musselburgh
- Bathgate
- Bonnyrigg
- Penicuik
- Broxburn
- Linlithgow
- Armadale
- Dalkeith
- Tranent
- Whitburn
- Dunbar
- Prestonpans
- Haddington
What does a replacement block drive involve?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
- Break-out of the old surface with waste removal and skip or grab lorry
- Drainage added where the old drive sent water to the house or road
- Levels set below the damp-proof course with falls away from the house
- Assessment of the old base: keep, top up or replace
- New edging, sub-base where needed, and the block drive
What the survey covers
- Whether front-garden planning rules apply
- Where an electric vehicle charger cable might run
- Where rain will go: falls, lawn, border, channel or soakaway
- Steps, thresholds and door heights
- Ground conditions under the old surface and how deep the sub-base must be
Rules for front drives in Edinburgh and the Lothians
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Replace an old drive in Edinburgh and the Lothians: questions
How much does a replacement block drive cost in Edinburgh and the Lothians?
Our guide for Edinburgh and the Lothians is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.
Is the survey in Edinburgh and the Lothians free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Can you match the blocks to my house in Edinburgh and the Lothians?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
