Planning a replacement block drive in Bathgate
Bathgate is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a replacement block drive cost in Bathgate?
For Bathgate, our guide is £95–£180 per m² including VAT, so a 45 m² replacement drive is likely to be £4,300–£8,100. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Break-out of the old surface with waste removal and skip or grab lorry
- New edging, sub-base where needed, and the block drive
- Drainage added where the old drive sent water to the house or road
- Levels set below the damp-proof course with falls away from the house
- Assessment of the old base: keep, top up or replace
Before we price your replacement block drive
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Edges against lawns, beds, walls and neighbours
- Existing manhole and inspection covers, and whether to recess them
- Block range, thickness, colour and pattern to suit the house
- Trees and roots near the drive
Planning and kerb rules in Bathgate
Bathgate is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Replace an old drive in Bathgate: questions
Is the survey in Bathgate free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a replacement block drive cost in Bathgate?
Our guide for Bathgate is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do you cover Armadale, Whitburn and Livingston?
Yes. We cover Bathgate and the places around it, including Armadale, Whitburn and Livingston, and the rest of Edinburgh and the Lothians.
Replace an old drive near Bathgate
Nearby towns we cover for replace an old drive, and replace an old drive across Edinburgh and the Lothians:
- Replace an old drive in Armadale
- Replace an old drive in Whitburn
- Replace an old drive in Livingston
- Replace an old drive in Linlithgow
- Replace an old drive in Broxburn
- Replace an old drive in Penicuik
