Block paved driveway extensions in Bath: the local picture
Across Bath, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.
How much does a driveway extension cost in Bath?
For Bath, our guide is £90–£150 per m² including VAT, so a 15 m² extension is likely to be £1,550–£2,600. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Driveway extension in block paving | £90–£150 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What does a driveway extension involve?
The hard part is the join. Blocks from the same range can differ in shade from a batch made years ago, and older blocks have weathered, so the survey looks at whether a close match is possible, whether lifting and re-mixing some existing blocks will help, or whether a deliberate border or contrasting panel will look better than a near-miss.
- Old edge restraint taken out and the new paving toothed into the old pattern
- New edging, kerbs or a low retaining edge where the lawn is cut back
- Dig-out and sub-base for the new area
- Check of the existing drive: block range, thickness, levels and condition
- Matching options: same range, re-mixing old and new, or a planned contrast
What we check on a Bath survey
- Existing manhole and inspection covers, and whether to recess them
- Trees and roots near the drive
- Edges against lawns, beds, walls and neighbours
- The kerb: is it already dropped, and is it wide enough?
- Access for a mini-digger, skip or grab lorry
Do you need permission in Bath?
Bath is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Drive extensions in Bath: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How much does a driveway extension cost in Bath?
Our guide for Bath is £90–£150 per m² including VAT, so a 15 m² extension is usually about £1,550–£2,600. Your fixed price follows the survey.
Do you cover Frome, Nailsea and Portishead?
Yes. We cover Bath and the places around it, including Frome, Nailsea and Portishead, and the rest of Somerset.
How long does a driveway extension take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Drive extensions near Bath
Nearby towns we cover for drive extensions, and drive extensions across Somerset:
- Drive extensions in Frome
- Drive extensions in Nailsea
- Drive extensions in Portishead
- Drive extensions in Clevedon
