Planning a block paving cleaning job in Bath
Bath has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.
How much does a block paving cleaning job cost in Bath?
For Bath, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £125–£250. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving cleaning job involve?
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Rotary surface clean at a pressure that will not blow out the joints
- Pre-treatment where needed
- Kiln-dried sand brushed in once dry (re-sanding package)
- Optional biocide and sealer
- Rinse down of edges, steps and walls
How we find the cause
- How much joint sand is left
- Moss, algae, weeds and oil staining
- Which sealer finish suits a slope or patio
- Type of block and its age
- Whether the paving is permeable (no sand, no sealing with the wrong product)
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Cleaning in Bath: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in Bath be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Do you cover Frome, Nailsea and Portishead?
Yes. We cover Bath and the places around it, including Frome, Nailsea and Portishead, and the rest of Somerset.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Cleaning near Bath
Nearby towns we cover for cleaning, and cleaning across Somerset:
