Somerset · Lift and re-lay

Lift and re-lay block paving in Bath

If your drive or patio in Bath has dips, ruts or broken blocks, we can usually re-use your own blocks so the repair matches.

  • Postcodes BA1, BA2, BS31
  • £35–£80 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Planning a lift and re-lay job in Bath

Bath has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.

The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.

How much does a lift and re-lay job cost in Bath?

Guide price in Bath£35–£80 per m²Including VAT at 20%

Most lift and re-lay job quotes in the South West fall within £35–£80 per m² including VAT. 30 m² re-laid would usually be about £1,050–£2,400, with any extras listed separately on your quote.

ItemGuide price inc VAT
Lift and re-lay on a sound base£35–£80 per m²
Small repair (a few blocks or a short trench)£200–£650
Sunken or rutted patch repaired£300–£1,200
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

  • Survey of the blocks: thickness, damage and whether they are worth re-using
  • Sub-base repaired or rebuilt where needed
  • Lifting, cleaning and stacking
  • New screeded laying course
  • Jointing sand and compaction

How we find the cause

  • Condition and thickness of your existing blocks
  • What caused the dip or movement: base, laying course, edging or drains
  • Trees, roots and past trenches
  • Whether the edging has moved or was never set in concrete
  • Falls, so water does not collect again

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Lift and re-lay in Bath: questions

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

How much does a lift and re-lay job cost in Bath?

Our guide is £35–£80 per m² including VAT. Small repairs are often priced from photos.

Can you repair block paving in Bath without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Do you cover Frome, Nailsea and Portishead?

Yes. We cover Bath and the places around it, including Frome, Nailsea and Portishead, and the rest of Somerset.

Lift and re-lay near Bath

Nearby towns we cover for lift and re-lay, and lift and re-lay across Somerset:

Other block paving services in Bath

Or see all block paving services in Bath.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote