Somerset · Cleaning

Block paving cleaning in Portishead

For drives and patios in Portishead and Nailsea, we treat cleaning, re-sanding and sealing as one job so the paving looks good for longer.

  • Postcodes BS20
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Portishead: the local picture

Portishead is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.

How much does a block paving cleaning job cost in Portishead?

Guide price in Portishead£2.50–£5 per m²Including VAT at 20%

Expect block paving cleaning jobs in Portishead to come in at around £2.50–£5 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £125 and £250.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our cleaning service

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Rinse down of edges, steps and walls
  • Weeds and moss removed from the joints
  • Pre-treatment where needed
  • Rotary surface clean at a pressure that will not blow out the joints
  • Kiln-dried sand brushed in once dry (re-sanding package)

How we find the cause

  • Which sealer finish suits a slope or patio
  • Walls, doors and planting to protect
  • How much joint sand is left
  • Moss, algae, weeds and oil staining
  • Shade and drainage, which affect regrowth

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Cleaning in Portishead: questions

How much does a block paving cleaning job cost in Portishead?

Guide price for Portishead: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

How often should block paving in Portishead be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Do you cover Nailsea, Clevedon and Weston-super-Mare?

Yes. We cover Portishead and the places around it, including Nailsea, Clevedon and Weston-super-Mare, and the rest of Somerset.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Cleaning near Portishead

Nearby towns we cover for cleaning, and cleaning across Somerset:

Other block paving services in Portishead

Or see all block paving services in Portishead.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Portishead.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote