Planning a block paved driveway in Cannock
Cannock has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.
How much does a block paved driveway cost in Cannock?
Guide price in Cannock: £85–£140 per m² including VAT, which puts a 50 m² double drive at about £4,250–£7,000. These are West Midlands guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paved driveway involve?
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
- Crushed-stone sub-base laid in layers and compacted
- Cuts at edges, around covers and against the house
- Sharp-sand laying course screeded to falls
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Edge restraints or kerbs bedded and haunched in concrete
Before we price your block paved driveway
- Access for a mini-digger, skip or grab lorry
- Steps, thresholds and door heights
- Whether front-garden planning rules apply
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Ground conditions under the old surface and how deep the sub-base must be
Planning and kerb rules in Cannock
Cannock is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Block paved driveways in Cannock: questions
Is the survey in Cannock free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Can you match the blocks to my house in Cannock?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a block paved driveway cost in Cannock?
Our guide for Cannock is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
Block paved driveways near Cannock
Nearby towns we cover for block paved driveways, and block paved driveways across Staffordshire:
- Block paved driveways in Burntwood
- Block paved driveways in Rugeley
- Block paved driveways in Lichfield
- Block paved driveways in Stafford
- Block paved driveways in Tamworth
- Block paved driveways in Burton upon Trent
