Block paving driveways in Tamworth: the local picture
Tamworth has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.
How much does a block paved driveway cost in Tamworth?
Expect block paved driveways in Tamworth to come in at around £85–£140 per m², including VAT at 20%. As an example, a 50 m² double drive usually comes to between £4,250 and £7,000.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paved driveway involve?
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
- Crushed-stone sub-base laid in layers and compacted
- Survey, measurements and a written, itemised quote
- Cuts at edges, around covers and against the house
- Edge restraints or kerbs bedded and haunched in concrete
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
What we check on a Tamworth survey
- Ground conditions under the old surface and how deep the sub-base must be
- Steps, thresholds and door heights
- The kerb: is it already dropped, and is it wide enough?
- Existing manhole and inspection covers, and whether to recess them
- Where an electric vehicle charger cable might run
Planning and kerb rules in Tamworth
Tamworth is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Block paved driveways in Tamworth: questions
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Is the survey in Tamworth free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a block paved driveway cost in Tamworth?
Our guide for Tamworth is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
Can you match the blocks to my house in Tamworth?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Block paved driveways near Tamworth
Nearby towns we cover for block paved driveways, and block paved driveways across Staffordshire:
- Block paved driveways in Lichfield
- Block paved driveways in Burntwood
- Block paved driveways in Burton upon Trent
- Block paved driveways in Rugeley
- Block paved driveways in Cannock
- Block paved driveways in Stafford
