Staffordshire · Block paved driveways

Block paving driveways in Burton upon Trent

We quote block paved driveways throughout Burton upon Trent and Staffordshire. The survey sets the depth of dig and the drainage; the pattern and colour are your choice.

  • Postcodes DE14, DE15, DE13
  • £85–£140 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Burton upon Trent: the local picture

Across Burton upon Trent, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.

Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.

How much does a block paved driveway cost in Burton upon Trent?

Guide price in Burton upon Trent£85–£140 per m²Including VAT at 20%

In the West Midlands, a block paved driveway usually costs £85–£140 per m² including VAT. For a 50 m² double drive, that is roughly £4,250–£7,000. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£85–£140 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

  • Edge restraints or kerbs bedded and haunched in concrete
  • Blocks laid in your chosen pattern, with a contrasting border if wanted
  • Cuts at edges, around covers and against the house
  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Sharp-sand laying course screeded to falls

What the survey covers

  • Steps, thresholds and door heights
  • Edges against lawns, beds, walls and neighbours
  • Access for a mini-digger, skip or grab lorry
  • Whether front-garden planning rules apply
  • Trees and roots near the drive

Rules for front drives in Burton upon Trent

Burton upon Trent is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Block paved driveways in Burton upon Trent: questions

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Can you match the blocks to my house in Burton upon Trent?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Do you cover Lichfield, Tamworth and Rugeley?

Yes. We cover Burton upon Trent and the places around it, including Lichfield, Tamworth and Rugeley, and the rest of Staffordshire.

Do I need planning permission for a block paved driveway in Burton upon Trent?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Block paved driveways near Burton upon Trent

Nearby towns we cover for block paved driveways, and block paved driveways across Staffordshire:

Other block paving services in Burton upon Trent

Or see all block paving services in Burton upon Trent.

Next step

Get a guide price in two minutes

Ready to talk about your block paved driveway? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote