Staffordshire · Dropped kerbs

Dropped kerbs with a new drive in Burton upon Trent

We arrange dropped kerbs for homes across Burton upon Trent (DE14, DE15, DE13), usually alongside a new or re-laid block drive.

  • Postcodes DE14, DE15, DE13
  • £1,000–£3,000 inc VAT
  • Free survey for new paving
Lowered kerb on a residential pavement leading to a charcoal block paved driveway

Dropped kerbs with a new drive in Burton upon Trent: what to expect

Burton upon Trent has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.

Inter-war semis with narrow front gardens are common in the West Midlands, so front garden conversions and drive widenings are often the practical choice.

How much does a dropped kerb cost in Burton upon Trent?

Guide price in Burton upon Trent£1,000–£3,000Including VAT at 20%

In the West Midlands, a dropped kerb usually costs £1,000–£3,000 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Dropped kerb (vehicle crossover) construction£1,000–£3,000
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Soakaway£900–£2,000
Highway authority dropped kerb application fee£55–£500

Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What does a dropped kerb involve?

We do not take money for kerb work we cannot legally do. What we do is check whether your property is likely to qualify, help you with the application, coordinate the timing with your new drive, and either price the crossover where the authority allows private contractors or work alongside the authority's own contractor where it does not.

  • Coordination so the drive and crossover are finished together
  • Eligibility check: visibility, trees, street furniture, frontage depth
  • Drive levels set to meet the new kerb line
  • Help with the highway authority application and drawings
  • Crossover construction where the authority permits our contractor

What we check on a Burton upon Trent survey

  • Ground conditions for any soakaway
  • Where water collects now and where it can go
  • How the new work ties into the paving
  • Levels of the pavement, kerb and drive
  • Who must approve the work and how long that takes

Rules for front drives in Burton upon Trent

Burton upon Trent is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Dropped kerbs in Burton upon Trent: questions

How much does a dropped kerb cost in Burton upon Trent?

Guide price: £1,000–£3,000 including VAT. The survey confirms the work needed.

Who approves a dropped kerb in Burton upon Trent?

For a dropped kerb, your local highway authority (usually your council). For drainage and covers on private land, no approval is usually needed, but connections to public sewers need the water company's consent.

Do you work in Lichfield, Tamworth and Rugeley?

Yes. We cover Burton upon Trent and the places around it, including Lichfield, Tamworth and Rugeley, and the rest of Staffordshire.

Can this be done at the same time as a new drive in Burton upon Trent?

Yes, and it usually should be, so the levels match and the paving is only disturbed once.

Dropped kerbs near Burton upon Trent

Nearby towns we cover for dropped kerbs, and dropped kerbs across Staffordshire:

Other block paving services in Burton upon Trent

Or see all block paving services in Burton upon Trent.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote