Sunken and rutted block paving in Burton upon Trent: the local picture
Burton upon Trent has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Inter-war semis with narrow front gardens are common in the West Midlands, so front garden conversions and drive widenings are often the practical choice.
How much does a sunken area repair cost in Burton upon Trent?
Guide price in Burton upon Trent: £300–£1,200 including VAT. These are West Midlands guide figures; the survey or your photos confirm the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What does a sunken area repair involve?
Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.
- Sub-base dug out and rebuilt where it has failed
- Blocks lifted, cleaned and stacked for re-use
- Same blocks relaid, re-jointed and compacted
- Investigation of the cause (drain, sub-base, laying course, edging)
- New laying course screeded to the correct level and falls
Before we price your sunken area repair
- Replacement blocks or hidden blocks to swap in
- Whether the edging has moved or was never set in concrete
- Condition and thickness of your existing blocks
- What caused the dip or movement: base, laying course, edging or drains
- Whether a drain or gully is leaking under the paving
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Sunken paving in Burton upon Trent: questions
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Do you cover Lichfield, Tamworth and Rugeley?
Yes. We cover Burton upon Trent and the places around it, including Lichfield, Tamworth and Rugeley, and the rest of Staffordshire.
How much does a sunken area repair cost in Burton upon Trent?
Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.
Sunken paving near Burton upon Trent
Nearby towns we cover for sunken paving, and sunken paving across Staffordshire:
- Sunken paving in Lichfield
- Sunken paving in Tamworth
- Sunken paving in Rugeley
- Sunken paving in Burntwood
- Sunken paving in Cannock
- Sunken paving in Stafford
