Planning a block paving sealing job in Cannock
Cannock has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Inter-war semis with narrow front gardens are common in the West Midlands, so front garden conversions and drive widenings are often the practical choice.
How much does a block paving sealing job cost in Cannock?
Expect block paving sealing jobs in Cannock to come in at around £5–£15 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £250 and £750.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Second coat where the product requires it
- Check that the paving is clean, re-sanded and dry
- Drying time and a date when cars can return
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
How we find the cause
- Shade and drainage, which affect regrowth
- Type of block and its age
- Which sealer finish suits a slope or patio
- Moss, algae, weeds and oil staining
- Walls, doors and planting to protect
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in Cannock: questions
Do you cover Burntwood, Rugeley and Lichfield?
Yes. We cover Cannock and the places around it, including Burntwood, Rugeley and Lichfield, and the rest of Staffordshire.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Cannock?
Guide price for Cannock: £5–£15 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Cannock be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Cannock
Nearby towns we cover for sealing, and sealing across Staffordshire:
- Sealing in Burntwood
- Sealing in Rugeley
- Sealing in Lichfield
- Sealing in Stafford
- Sealing in Tamworth
- Sealing in Burton upon Trent
