Block paving cleaning in Cannock: what to expect
Cannock has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.
How much does a block paving cleaning job cost in Cannock?
For Cannock, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £125–£250. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving cleaning job involve?
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Rotary surface clean at a pressure that will not blow out the joints
- Pre-treatment where needed
- Weeds and moss removed from the joints
- Optional biocide and sealer
- Rinse down of edges, steps and walls
What we look at first in Cannock
- Moss, algae, weeds and oil staining
- Which sealer finish suits a slope or patio
- Type of block and its age
- Walls, doors and planting to protect
- Shade and drainage, which affect regrowth
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Cleaning in Cannock: questions
Do you cover Burntwood, Rugeley and Lichfield?
Yes. We cover Cannock and the places around it, including Burntwood, Rugeley and Lichfield, and the rest of Staffordshire.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving cleaning job cost in Cannock?
Guide price for Cannock: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
Cleaning near Cannock
Nearby towns we cover for cleaning, and cleaning across Staffordshire:
- Cleaning in Burntwood
- Cleaning in Rugeley
- Cleaning in Lichfield
- Cleaning in Stafford
- Cleaning in Tamworth
- Cleaning in Burton upon Trent
