How much does a block paving cleaning job cost in Staffordshire?
For Staffordshire, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £125–£250. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the West Midlands, checked 9 November 2026.
Towns we cover in Staffordshire
Choose a town for local prices and details for cleaning:
- Stoke-on-Trent
- Newcastle-under-Lyme
- Burton upon Trent
- Cannock
- Tamworth
- Stafford
- Lichfield
- Kidsgrove
- Burntwood
- Longton
- Rugeley
What does a block paving cleaning job involve?
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.
- Weeds and moss removed from the joints
- Optional biocide and sealer
- Kiln-dried sand brushed in once dry (re-sanding package)
- Rotary surface clean at a pressure that will not blow out the joints
- Pre-treatment where needed
How we find the cause
- Walls, doors and planting to protect
- Which sealer finish suits a slope or patio
- Whether any blocks are loose or sunken first
- How much joint sand is left
- Shade and drainage, which affect regrowth
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Cleaning in Staffordshire: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in Staffordshire be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How much does a block paving cleaning job cost in Staffordshire?
Guide price for Staffordshire: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
