Staffordshire · Cleaning

Block paving cleaning in Burntwood

We clean, re-sand and seal block paving across Burntwood (WS7), using a rotary cleaner at a pressure that will not damage the blocks.

  • Postcodes WS7
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Planning a block paving cleaning job in Burntwood

Homes in Burntwood include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.

How much does a block paving cleaning job cost in Burntwood?

Guide price in Burntwood£2.50–£5 per m²Including VAT at 20%

Guide price in Burntwood: £2.50–£5 per m² including VAT, which puts a 50 m² drive at about £125–£250. These are West Midlands guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our cleaning service

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Rinse down of edges, steps and walls
  • Pre-treatment where needed
  • Optional biocide and sealer
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rotary surface clean at a pressure that will not blow out the joints

How we find the cause

  • Shade and drainage, which affect regrowth
  • How much joint sand is left
  • Type of block and its age
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Moss, algae, weeds and oil staining

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Cleaning in Burntwood: questions

Do you cover Lichfield, Cannock and Rugeley?

Yes. We cover Burntwood and the places around it, including Lichfield, Cannock and Rugeley, and the rest of Staffordshire.

How much does a block paving cleaning job cost in Burntwood?

Guide price for Burntwood: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Burntwood be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Cleaning near Burntwood

Nearby towns we cover for cleaning, and cleaning across Staffordshire:

Other block paving services in Burntwood

Or see all block paving services in Burntwood.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote